Steel Wire For Rope

Steel Wire product with specification and export packing support

The steel wire rope needs to be subjected to alternating loads during its use, and its performance is mainly determined by the mechanical properties of the steel wire, the surface state of the steel wire and the structure of the steel wire rope. The steel wire material includes carbon steel or alloy steel, which is made by cold drawing or cold rolling. The cross section of the steel wire is round or special-shaped (T-type S-type Z-type). The special-shaped cross-section steel wire is mainly used for the production of sealing wire ropes. High tensile strength and toughness, and suitable surface treatment of steel wire to meet the needs of different environmental conditions.
Additional Info
Diameter Range: 0.6-5.0 mm
Surface Finish: Hot Dipped Galvanizing
Galvanised Wire Working Specifications
Given that galvanized wire is classified according to the amount of zinc coating, the following table outlines the difference between tensile strength.
Nominal Diameter
Minimum number of reverse bends
Minimum number of Torsions (Bright and Class B)
(Bright and Class B)
1770 Mpa
1960 Mpa
2160Mpa
1770 Mpa
1960 Mpa
2160Mpa
Over 0.6mm ~ incl.0.65mm
11
10
9
28
25
23
Over 0.65mm ~ incl.0.70mm
10
9
8
28
25
23
Over 0.70mm ~ incl.0.75mm
16
15
14
28
25
23
Over 0.75mm ~ incl.0.80mm
15
14
13
28
25
22
Over 0.80mm ~ incl.0.85mm
13
12
11
28
25
22
Over 0.85mm ~ incl.0.90mm
12
11
10
28
25
22
Over 0.90mm ~ i